Automatic calibration system

H,HS,Robotic plasma cutting machine use the automatic calibration system, fast feeding, fast cutting

Greatly improve production efficiency, reduce labor intensity, only need to put the material on the feeder, the machinery will calibrate and fix the materials automatically

what is the Automatical calibration system

An automatic calibration system in a tube cutting machine is designed to ensure that the cutting process is accurate and consistent. This system typically uses sensors and software to measure the position of the cutting head and adjust it as necessary to ensure that the cuts are made at the correct length and angle.

Here is a possible description of how such a system might work:

  1. The tube cutting machine is equipped with sensors that can measure the position of the cutting head in three dimensions (X, Y, and Z).

  2. The machine is also equipped with software that can compare the actual position of the cutting head to the desired position, as specified in the cutting program.

  3. Before each cutting job, the machine runs a calibration routine that measures the position of the cutting head at several points along its range of motion. This information is used to create a calibration profile that maps the actual position of the cutting head to the desired position.

  4. During the cutting process, the machine continuously measures the position of the cutting head and compares it to the calibration profile. If the actual position deviates from the desired position by more than a certain threshold, the software sends a signal to the machine’s control system to adjust the position of the cutting head.

  5. The adjustment process may involve moving the cutting head along one or more axes, or it may involve rotating the tube or the cutting head to achieve the correct angle of cut.

  6. Once the cutting process is complete, the machine may perform a final calibration check to ensure that the calibration profile is still accurate. If necessary, the machine can recalibrate itself before the next cutting job.

An automatic calibration system can greatly improve the accuracy and consistency of tube cutting, particularly for complex shapes or tight tolerances. However, it requires careful design and implementation to ensure that the sensors, software, and control system work together seamlessly to produce high-quality cuts.

Machine with Automatical calibration system can let the feeding work faster, but it can not cut tubes because of their structure

pipe profile
8 axis CNC plasam cutting machine
h beam cutting
Robotic plasam cutting machine
plasma tube cutting machine
HS plasam cutting machine

Always one fit you

h beam cutting
Robotic plasma cutting machine
h beam cutting
HS series plasma cutting machine
All pipe cnc cutting machine
5 axis CNC plasma cutting machine
auto feeding system
LTA CNC tube laser cutting machine
tube laser cnc machine
LT Tube laser cutting machine
pipe profile
8 axis plasma cutting machine
plasma pipe bevel cutting machine
Round tube cutting machine
cnc pipe cutting bevel machine
6 axis pipe cutting machine

Plasma air cutting bevelling

5 Videos

cnc laser tubing

5 Videos

Our news